Søg
var returnUrl = webHelper.GetRawUrl(Context.Request);
All Categories
    Menu Close

    Accusump

    Canton Racing Accusump

    Canton Racing Accusump olieakkumulator / oliebeholder der er designet til at opbevare olie når olietrykket er højt. Dette skaber en buffer, der kan frigives ved et fald i olietrykket, som det kan ske under intens kørsel i eks. sving eller når du køre drift. Accusump ON/OFF ventilen kontrollerer frigivelsen af den akkumulerede olie, hvilket bidrager til at opretholde et stabilt olietryk. Accusump kan installeres med specielt designede mounting clamps, der sikrer beholderen bliver på sin plads under forskellige kørselsforhold. Accusump Pro Version Electric Pressure Control Valve er en ventil der præcist frigiver olie til motoren hvis olietrykket kommer under sensorens forudbestemt olietryk. 

    Accusump enhederne repræsenterer den oprindelige og mest banebrydende teknologi inden for olieakkumulatorer i bilindustrien. Alle Accusump enheder er skabt med den højeste grad af præcision og bygget med omhu. De er konstrueret af solidt aluminiumsrør med en overflade, der er rullet glat, og en indvendig Teflon-belægning for ekstra holdbarhed. De indvendige stempler og skruehætter er udformet af bearbejdet aluminium, hvilket sikrer en lang levetid og pålidelighed. Hver Accusump enhed er ydermere udstyret med en trykaflastningsventil for at sikre øget sikkerhed og optimal kontrol.

    Sådan virker en Accusump

    Sorter efter

    AN10 Han - 1/2"NPT Han - Nippel Fitting - Sort Alu

    1.00202.08051
    59,00 (DKK) inkl. moms

    ON/OFF ventil med 3/8" NPT HUN gevind

    1.00210.02043
    Længde 45mm.
    200,00 (DKK) inkl. moms 135,00 (DKK) inkl. moms

    Mounting Clamps Steel For 2/3 Qt Accusump Oil Accumulator - 24-200

    1.00109.04-24-200
    Steel band mounting brackets for our 4-1/4" Dia. Accusumps. Mounting clamps are required for all Accusumps. When used on each end of an Accusump they provide the proper support at the end caps to ensure the tube does not become distorted. These are sold as a set of two stainless steel T-clamps.
    375,00 (DKK) inkl. moms

    Accusump 3 QT - Oil Accumulator - No Valve

    1.00301.03-24-006
    The 3 Quart Accusump is ideal for V-8 and high horsepower V-6 and 4 cylinders engines. It is the original and has been providing pre-oiling and surge protection in all types of racing and recreational vehicles for over 30 years. Has a 16" long and 4-1/4" dia. body.
    2.875,00 (DKK) inkl. moms

    Accusump Pro Electric Valve Kit - 24-270X

    1.00123.02-24-270X
    The Electric Accusump Valve kit provides a convenient way of operating the Accusump.
    2.150,00 (DKK) inkl. moms

    Accusump 2 QT - Oil Accumulator - No Valve

    1.00301.02-24-026
    The 2 Quart Accusump is ideal for surge control on small block V-8, V-6, and 4 cylinder engines as well as pre-oiling for all engines. Has a 12" long and 4-1/4" dia. body.
    2.812,50 (DKK) inkl. moms

    Accusump Check Valve 1/2" NPT - 24-280

    1.00123.02-24-280
    399,00 (DKK) inkl. moms

    Accusump Pro Version Electric Pressure Control Valve 55-60 Psi - 24-275X

    1.00135.02011
    This Electric Pressure Control Valve Kit is for a discharge/refill of 55-60 PSI.
    2.550,00 (DKK) inkl. moms 2.245,00 (DKK) inkl. moms

    Moroso ACCUMULATOR, 3 QUART

    1.00108.05-mor23900
    Accumulator, 3 quart capacity, 20-1/8" x 4-1/4" cylinder
    2.845,00 (DKK) inkl. moms

    ON/OFF ventil med 1/2" NPT HUN gevind

    1.00210.02044
    Længde 60mm.
    200,00 (DKK) inkl. moms 135,00 (DKK) inkl. moms

    Moroso Accumulator Mount - 2 Pack

    1.00148.01-23920
    500,00 (DKK) inkl. moms

    Accusump Pro Version Electric Pressure Control Valve 20-25 Psi - 24-271X

    1.00134.02-24-271X
    This Electric Pressure Control Valve Kit is for a discharge/refill of 20-25 PSI.
    2.375,00 (DKK) inkl. moms 2.250,00 (DKK) inkl. moms

    Accusump 2 QT - Oil Accumulator - KIT

    1.00310.03-24-126
    This 2 quart Marine Accusump kit is for pre-oiling and surge control on all applications. Tube is 12" long with 4-1/4" Dia. All components are anodized aluminum, stainless, or brass. The kit comes with a liquid filled stainless steel pressure gauge, stainless steel mounting clamps, brass safety valve, E. P. C. valve system, on / off switch, wire and terminals and installation instructions.
    6.625,00 (DKK) inkl. moms 6.375,00 (DKK) inkl. moms

    Accusump Pro Version Electric Pressure Control Valve 35-40 Psi - 24-273X

    1.00119.05-24-273X
    This Electric Pressure Control Valve Kit is for a discharge/refill of 35-40 PSI.
    2.625,00 (DKK) inkl. moms

    Moroso Accumulator Mount - Heavy Duty - 2 Pack

    1.00141.04-23921
    519,48 (DKK) inkl. moms